City & Gilds (C&G) 2391 -20 – Electrical Training Courses, electrician Courses

To be an absolute Electrical Engineer or an Electrician, it is very much required that, electrical engineer trainee need to be very clear about the designing of any of the electrical equipments or any of the electrical appliances. Until and unless the designing point is clear then only the electricians will be able to cope up with, any of the problems associated with a common or typical electrical appliance.

While going for installation of any of the electrical equipments or any of the electrical appliances the design of the place where the installation is to be done need to be considered properly by taking the equipment into consideration or else the whole arrangement can go wrong. It is very much necessary to ensure that the equipment is placed at a right place before carrying out the installation work. Because if the designing part fails while installing the equipment, things can go wrong.

Once the equipment is installed properly, with all the things taken into consideration, now the part which is to be considered is the verification of the equipment which is installed, to check whether, after installation of the equipment it is functioning properly or not. It is always advisable and that after installing any of the electrical appliances right from simple to typical one the verification part need to be considered compulsory. If in case the instrument is not installed properly then it will definitely lead to a serious problem, like- the instrument won’t work, or while working it could lead to hazardous disaster. So to avoid such circumstances to happen, always verify all the appliances which is been installed.

If you are intended to be a professional, then it is compulsory required that one should be expertise in designing, installation of electrical appliances, along with it, one should also be expertise in knowing the specification of the appliances, testing of the appliances so that after installation of any of the electrical appliances, if there comes any problem the electrician or the electrical engineer should be trained enough to identify the problem and sort out the problem effectively.

Complete detail of the course related to Design, Erection & Verification of Electrical Installations is available at City & Guilds (C&G) 2391-20 – Design, Erection & Verification of Electrical Installations  

To know more on courses available for Electrical Training Services, you can click on to : Trans Euro Electrotechnical Training and Consultancy.

An overview on Electrician Courses : City & Guilds (C&G) 2377 PAT – Portable Appliance Testing

The course which is to be followed while pursuing any of the electrician courses is City & Guilds (C&G) 2377 PAT – Portable Appliance Testing. As City & Guilds (C&G) 2377 PAT – Portable Appliance Testing gives you all the information related to the IET Code of Practice which is very much required while dealing with any of the electrical equipments or appliances.

The COP abbreviated as Code of Practice is a complete guiding standards which provides you complete detail on testing and assessing any of the electrical appliances or any of the electrical equipment. COP gives you training to work on IT equipments provided with plugs and sockets, luminaries and similar electrical appliances.

One who is willing to be a COP certified electrician need to clear a COP written test which is basically a multiple choice questions, and the questions are based completely on the technical capability, skills of electrician and electrical engineering trainee.  The COP test is set up by the City & Guilds but run by Trans-Euro Engineering Services Ltd in Towcester.

The aim of COP test is to make all the electrical trainees excel in their field of electrical engineering. This test makes them capable to handle all the risk associated with any of the electrical appliances or any of the electrical equipment. Any of COP cleared electricians will be able to handle any of the typical equipment, and are very much capable to identify any of the issues associated with it. Until and unless problem or issues is to be identified, the problem cannot be solved. A professional electrician or a professional electrical engineer is the one who excels in identifying the problem in no time and then resolve the issues in any of the electrical appliances.

It is very much required for any of the electricians or any of the electrical engineering trainees to clear COP tests and get its certification. If you are willing to appear for the test and wanted to know more about COP test, please click on Trans Euro Electrotechnical Training and Consultancy.